Garage Door Remote Control Replacement for Chamberlain Liftmaster

Programming Method

Step 1: Program the remote control A. First, press and hold the "program button" (located at the bottom right of the remote) for about 3-5 seconds using a safety pin until the LED flashes quickly. Once the LED stops lighting up, you can proceed to the next step. NOTE: You need to press and hold for a few seconds until the LED flashes, not just press the program button once and release.

B. Next, press and release the button you want to program. The number of presses should match your garage door opener type: - Press 1 time: Security+ 2.0 (Yellow Learn Button) - Press 2 times: 315 MHz Security+ (Purple Learn Button) - Press 3 times: 390 MHz Security+ (Red or Orange Learn Button) - Press 4 times: 390 MHz Billion Code (Green Learn Button)

C. Finally, press the "program button" 2 times quickly. The LED will blink once to confirm the selection. NOTE: The LED will not blink the first time, but will blink the second time.

Step 2: Use the programmed remote control in Step 1 to sync your garage door opener D. Fourth, press and hold the learn button of your garage door opener. The LED indicator will blink steadily for 30 seconds. E. Fifth, when the lights blink, press the button programmed in Point B until the lights on your garage door opener flash or 2 clicks are heard. F. Lastly, test the remote by pressing the programmed button, and the door will open and close.

Product Description This remote is a replacement, not an original accessory. If the remote you currently use is one of the remotes in the Compatibility List, or if the learn button of your door opener has the color characteristics in the list, then these remotes will be compatible with your motor. If you are unsure, please ask us to confirm without hesitation.

Common Compatibility List: - PURPLE learn button on the motor unit (Security+ 315MHz) for LiftMaster, Chamberlain, and Sears Craftsman models - RED or ORANGE learn button on the motor unit (Security+ 390MHz) for LiftMaster, Chamberlain, and Sears Craftsman models - YELLOW learn button on the motor unit (Security+2.0) for LiftMaster models - GREEN learn button on the motor unit (Billion code 390MHz) for LiftMaster, Chamberlain, and Sears Craftsman models

Three Channels: This remote control can replace 3 different major brands in one, allowing you to control 3 different garage doors with a single remote. You don't need to carry multiple remotes for your various doors and gates.

5 COLORS LEARN BUTTON SUPPORT: It is compatible with Liftmaster/Chamberlain/Craftsman/Genie garage door opener motors featuring Purple, Red/Orange, Green, or Yellow Learn Button frequencies from 315MHz to 390MHz.

Specifications: - Material: ABS Plastic - Color: Black - Battery: 3V CR2032 * 1 (Installed) - Channels: 3 (Support multiple garage doors) - Operating Frequency: 300MHz / 310MHz / 315MHz / 368MHz / 390MHz - Remote Control Range: Up to 100ft - Size: 2.6'' x 1.4'' x 0.7'' (Each remote) - Includes Keychain and English manual

Customer Reviews: 4.2 out of 5 stars (1,077 reviews), 4.3 out of 5 stars (903 reviews), 4.4 out of 5 stars (440 reviews), 4.4 out of 5 stars (273 reviews)

product information: